This is the JOBO CPA-2, the little brother to the CPP-2. The difference is mostly in the temperature control; the CPA is analog; The CPP is digital, and has a slightly shorter temperature range. This unit does not have the cold water solenoid or connection of the CPP-2.
The temperature control on this unit is less precise, but once it is calibrated will be just fine.
The lift on this one is in fair shape. It will suffice for a long time if the big, heavy, expert drums are not used. It will be fine for black and white developing.
This a TYP 4080; The serial number on this is 22462. This places it in the third revision JOBO did on their processors, meaning it has the larger tapered shaft motor, and will probably outlast earlier versions.
The lift on this one shows a bit of wear. One of the attachment tabs is broken off on the corner, but this does not impact the lift in use.
I am including a selection of the smaller JOBO tanks and drums:
JOBO 1530 film developing tank with 3 reels can work with 35mm or 120 film with top
works with or without a Jobo processor
JOBO 2830 small print drum up to 9 x 12 with top. One tank only
JOBO 2840 midsize print drum to 12 x 16 with one top. Two tanks
JOBO 2850 large print drum to 16 x 20, with one top. Two tanks - These tanks do not fit together nicely.
JOBO Testdrum for 4 x 5 prints. With top.